Number of control axes
*Number of control axes: 5
*Number of linkage axles: 3 axles with 5 axles optional
Feed axis function
*Minimum input increment: 0 0 0 1 m m（ 0 . 0 0 0 1 i n c h）
*Minimum instruction increment: 0 0 0 1 m m（ 0 . 0 0 0 1 i n c h）
*Maximum stroke: ± 9 9 9 9 9 9 9 9 9 × Minimum instruction increment
*Fast moving speed: up to 120 m/m i n
*Fast magnification: F 0, 25%, 50%, 100%, four levels of real-time adjustment
*Feed rate: 0-150%, 16 levels of real-time adjustment
*Interpolation methods: linear interpolation, arc interpolation (supporting three-point arc interpolation), thread interpolation, rigid tapping
*Automatic chamfering function
Thread function
*Normal thread (following the spindle)/rigid thread
*Single head/multi head metric British straight thread, taper thread, and end face thread, equal pitch thread and variable pitch thread
*Thread tailing length, angle, and speed characteristics can be set
*Thread pitch: 0 0.1 m m m to 500 m m m or 0 0 6 teeth/inch to 2 54 0 teeth/inch
Acceleration and deceleration function
*Cutting feed: front acceleration/deceleration linear type, front acceleration/deceleration S-type, rear acceleration/deceleration linear type, rear acceleration/deceleration exponential type
*Fast moving: front acceleration/deceleration linear type, front acceleration/deceleration S-type, rear acceleration/deceleration linear type, rear acceleration/deceleration exponential type
*Thread cutting: linear or exponential options available
*The starting speed, ending speed, and acceleration/deceleration time of acceleration/deceleration are set by parameters
Spindle function
*1 channel of 0 V~10 V analog voltage output
*1 channel spindle encoder feedback, the number of spindle encoder lines can be set (1000 p/r~5000 p/r)
*Encoder to spindle transmission ratio: (1-255): (1-255)
*Spindle speed: can be given by S code or PLC signal, with a speed range of 0 r/m i n to 9.9 9 r/m i n
*Spindle magnification: 50%~120%, a total of 8 levels of real-time adjustment
*Spindle constant linear speed control
*Rigid tapping
Tool function
*Tool length compensation
*Blade radius compensation (C-type)
*Tool wear compensation
*Tool Life Management
*Tool setting method: fixed point tool setting, trial cutting tool setting, reference point tool setting, automatic tool setting
*Tool deviation execution method: modify coordinate method, tool movement method
Accuracy compensation
*Reverse clearance compensation
*Memory type pitch error compensation
P L C function
*Two level P L C program, with a maximum of 4700 steps, and a refresh cycle of 8 ms for the first level program
*P L C program communication download
*Supports PL C warnings and PL C alarms
*Supports multiple PL C programs (up to 20), and the currently running PL C programs can be selected
*Basic I/O: 4 0 point input/3 2 point output
interface
* 10 . 0 inch widescreen L C D with a resolution of 1 0 2 4 × 7 6 8
*Displayed in multiple languages such as Chinese and English
*2D tool path display
*Real time clock
Operations Management
*Operation methods: edit, automatic, input, machine tool reset, handwheel/single step, manual, program reset
*Multi-level operation permission management
*Alarm Log
Program Editing
*Program capacity: 9.99 programs (including subroutines and macro programs)
*Editing functions: program/segment/word retrieval, modification, deletion, copying, pasting
*Program format: I S O code, supporting declarative macro code programming, supporting relative coordinate, absolute coordinate, and mixed coordinate programming
*Program call: Support macro program calls with parameters, 4-level subroutine nesting
Communication function
*R S 2 3 2: Bidirectional transmission of part programs, parameters, and other files, supporting PLC program and system software serial port upgrades
*USB: USB file operation, direct processing of USB files, support for PLC program, system software USB upgrade
Safety functions
*Emergency stop
*Hardware travel limit
*Software Journey Check
*Data backup and recovery
粵公網(wǎng)安備 44030602006806號(hào)
